No, this model is not compatible with remote sensors.

No, this model is not compatible with remote sensors.

Wi-Fi will work without a common “C” wire on most conventional systems. Heat pump systems and heat-only/cool-only systems do require a common “C” wire in order to operate Wi-Fi.

If you change your Wi-Fi router password, you will also need to clear the Wi-Fi settings in the thermostat and then update those Wi-Fi settings in the app. Open the app and go to the “Select Thermostat” screen. Select UPDATE ACCOUNT and enter you app account password. Select WI-FI SETTINGS. Select the thermostat to update and press SELECT. Select WI-FI NETWORK and press ENTER. Enter your new network name and password and then press ENTER. Follow the instructions in the app. For complete instructions, open a copy of the Wi-Fi Setup Guide by clicking here: Wi-Fi Setup Guide

If you change your Wi-Fi router password, you will also need to clear the Wi-Fi connection in the thermostat and then update your Wi-Fi settings in the app. Open the app and go to the “Select Thermostat” screen. Select UPDATE ACCOUNT and enter you app account password. Select WI-FI SETTINGS. Select the thermostat to update and press SELECT. Select WI-FI PASSWORD and press ENTER. Enter your new password and press ENTER. Follow the instructions in the app. For complete instructions, open a copy of the Wi-Fi Setup Guide by clicking here: Wi-Fi Setup Guide

Once you have the new Wi-Fi router up and running you will have to clear the Wi-Fi connection in the thermostat and then change the Wi-Fi settings in the app. For complete instructions, open a copy of the Wi-Fi Setup Guide by clicking here: Wi-Fi Setup Guide.

For instructions on connecting the thermostat to a Wi-Fi network, Open a copy of the Wi-Fi Setup Guide by clicking here: Wi-Fi Setup Guide

1) Press and hold down the CONFIG button for one second.
2) Press NEXT until you see the word WIFI in the display.
3) Press the ▲ (up) button until CL WIFI appears in the display.
4) Press NEXT to exit and clear the Wi-Fi connection.

Press and hold down the HOLD and RETURN buttons for 3 seconds and the thermostat will display the network name (SSID) you are connected to.  If you are not connected to a network, the display will flash WIFI and SCAN. Press RETURN to exit.

BlueLink thermostats are compatible with 802.11G networks. Ensure your router is either set up for G or MIXED mode. MIXED mode will accept most modes of communication.

Yes, but you must unhide the SSID during the thermostat registration process. Once registration is complete, you can once again hide the SSID using your routers network configuration tools.

Yes, however you must connect to the 2.4 GHz band and not the 5 GHz band. Additionally, these two bands must have different network names and network passwords. If you are using the same name and/or password for both bands you may experience connection problems with your thermostat.

No, your BlueLink Smart Connect thermostat is not able to connect to a Wi-Fi hotspot at this time.

If the in the thermostat display is flashing it means your thermostat has lost it’s Wi-Fi connection. Check your router to make sure you have Internet access. You may also try removing the thermostat from the wall sub-base for 15 seconds to reset the connection.

Most standard router security protocols are supported: OPEN, WPA/TKIP/PSK, WPA2/AES/PSK, WPA2/MIXED/PSK, WPA/AES/PSK and WPA2/TKIP/PSK.

This thermostat can only be used on a millivolt system if Wi-Fi is not being used and the thermostat is powered by batteries only.